Summary
Fluid Loss Additive include DOC-411L (standard) and DOC-411L-W (anti-freezing).
The product was suitable for a wide temperature range, and its high temperature resistance up to 230 ℃ . The cement slurry with this product had good fluidity, stability, less free water, no retarded effect, rapid strength development and has no special need to slurry-mixing water. Used in Both Fresh Water, Salt Water, Sea Water.
Physical and Chemical Properties
Item | Index | |
Type | DOC-411L(standard) | DOC-411L-W (anti-freezing) |
Appearance | Colorless or light yellow sticky liquid | Colorless or light yellow sticky liquid |
Density, g/cm3 | 1.10±0.05 | 1.10±0.05 |
Solubility, % | 100 | 100 |
Pour Point, ℃ | -5 | -15 |
Cement Slurry Properties
Item | Index | Test conditions |
Fluid Loss, mL | ≤50 | 80℃, 6.9MPa |
Thickening Time, min | ≥60 |
80℃, 45MPa/45min |
Initial Consistency, Bc | ≤25 | |
Compressive Strength, MPa | ≥14 | 80℃, Normal pressure, 24h |
Free Water, mL | ≤1.0 | 80℃, Normal pressure |
Slurry composition：100% Class G cement (high sulfur resistant), and 40.0% (BWOC) fresh water, and 4.0% (BWOC) DOC-411L, and 0.5% (BWOC) DOC-X60L。 | ||
Applications
The recommended operating temperature was below 230℃ (BHCT).
The recommended dosage was 3.0-5.0% (BWOC) in Fresh Water & Low Temperature and 3.0%-6.0% in Salt Water & High Temperature.
Package
200L/plastic drum, or based on customer’s request.
